View IRHF593230_720579.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD - 94450
RADIATION HARDENED POWER MOSFET THRU-HOLE (TO-39)
Product Summary
Part Number IRHF597230 IRHF593230 Radiation Level RDS(on) ID 100K Rads (Si) 0.54 -4.5A 300K Rads (Si) 0.54 -4.5A
IRHF597230 200V, P-CHANNEL
4#
TECHNOLOGY
c
International Rectifier's R5TM technology provides high performance power MOSFETs for space applications. These devices have been characterized for Single Event Effects (SEE) with useful performance up to an LET of 80 (MeV/(mg/cm2)). The combination of low RDS(on) and low gate charge reduces the power losses in switching applications such as DC to DC converters and motor control. These devices retain all of the well established advantages of MOSFETs such as voltage control, fast switching, ease of paralleling and temperature stability of electrical parameters.
T0-39
Features:
n n n n n n n n n
Single Event Effect (SEE) Hardened Ultra Low RDS(on) Low Total Gate Charge Proton Tolerant Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Package Light Weight
Absolute Maximum Ratings
Parameter
ID @ VGS = -12V, TC = 25C ID @ VGS = -12V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Avalanche Current Repetitive Avalanche Energy Peak Diode Recovery dv/dt Operating Junction Storage Temperature Range Lead Temperature Weight -4.5 -3.0 -18 25 0.2 20 157 -4.5 2.5 -25 -55 to 150
Pre-Irradiation
Units A
W
W/C
V mJ A mJ V/ns
o
C
300 (0.063in/1.6mm from case for 10s ) 0.98 ( Typical )
g
For footnotes refer to the last page
www.irf.com
1
06/18/02
IRHF597230
Pre-Irradiation
Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified)
Parameter Min Typ Max Units
-- -0.21 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 7.0 -- -- 0.54 -4.0 -- -10 -25 -100 100 40 8.5 15 25 30 50 120 -- V V/C V S( ) A
Test Conditions
VGS = 0V, ID = -1.0mA Reference to 25C, ID = -1.0mA VGS = -12V, ID = -3.0A VDS = VGS, ID = -1.0mA VDS > -15V, IDS = -3.0A VDS= -160V ,VGS=0V VDS = -160V, VGS = 0V, TJ =125C VGS = -20V VGS = 20V VGS = -12V, ID = -4.5A VDS = -100V VDD = -100V, ID = -4.5A, VGS =-12V, RG = 7.5
BVDSS Drain-to-Source Breakdown Voltage -200 BV DSS/T J Temperature Coefficient of Breakdown -- Voltage RDS(on) Static Drain-to-Source On-State -- Resistance VGS(th) Gate Threshold Voltage -2.0 gfs Forward Transconductance 3.6 IDSS Zero Gate Voltage Drain Current -- -- IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance -- -- -- -- -- -- -- -- -- --
nA nC
ns
nH
Measured from Drain lead (6mm /0.25in from package) to Source lead(6mm/0.25in from packge)with Source wire internally bonded from Source pin to Drain pad
Ciss C oss C rss
Input Capacitance Output Capacitance Reverse Transfer Capacitance
-- -- --
1340 190 20
-- -- --
pF
VGS = 0V, VDS = -25V f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
IS ISM VSD t rr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time
Min Typ Max Units
-- -- -- -- -- -- -- -- -- -- -4.5 -18 -5.0 200 1.2
Test Conditions
A
V ns C Tj = 25C, IS = -4.5A, VGS = 0V Tj = 25C, IF =-4.5A, di/dt -100A/s VDD -25V
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC RthJA Junction-to-Case Junction-to-Ambient
Min Typ Max Units
-- -- -- -- 5.0 175
C/W
Test Conditions
Typical Socket Mount
Note: Corresponding Spice and Saber models are available on the G&S Website. For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics Pre-Irradiation
IRHF597230
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25C, Post Total Dose Irradiation
Parameter
BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source On-State Resistance (TO-3) Static Drain-to-Source On-State Resistance (TO-39) Diode Forward Voltage 100K Rads(Si)1 Min Max -200 -2.0 -- -- -- -- -- -- -- -4.0 -100 100 -10 0.505 0.54 -5.0 300KRads(Si)2 Min Max -200 -2.0 -- -- -- -- -- -- -- -5.0 -100 100 -10 0.505 0.54 -5.0 Units V nA A V
Test Conditions
VGS = 0V, ID = -1.0mA VGS = VDS, ID = -1.0mA VGS =-20V VGS = 20 V VDS=-160V, VGS =0V VGS = -12V, ID =-3.0A VGS = -12V, ID =-3.0A VGS = 0V, IS = -4.5A
1. Part number IRHF597230 2. Part number IRHF593230
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion Br I Au LET (MeV/(mg/cm2)) 37.3 59.9 82.3 Energy (MeV) 285 345 357 VDS (V) Range (m) @VGS=0V @VGS=5V @VGS=10V @VGS=15V @VGS=20V 36.8 - 200 - 200 - 200 - 200 -75 32.7 - 200 - 200 - 200 - 50 -- 28.5 - 200 - 200 - 200 - 35 --
-250 -200 VDS -150 -100 -50 0 0 5 10 VGS 15 20 Br I Au
Fig a. Single Event Effect, Safe Operating Area
For footnotes refer to the last page
www.irf.com
3
IRHF597230
Pre-Irradiation
100
VGS TOP -15V -12V -7.0V -5.0V -4.5V -4.3V -4.0V BOTTOM -3.7V
100
VGS -15V -12V -7.0V -5.0V -4.5V -4.3V -4.0V BOTTOM -3.7V TOP
-I D, Drain-to-Source Current (A)
10
-I D, Drain-to-Source Current (A)
10
-3.7V
1
-3.7V
1
20s PULSE WIDTH Tj = 25C
0.1 0.1 1 10 100
20s PULSE WIDTH Tj = 150C
0.1 0.1 1 10 100
-VDS, Drain-to-Source Voltage (V)
-VDS, Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
100
2.5
R DS(on) , Drain-to-Source On Resistance (Normalized)
ID = -4.5A
-I D , Drain-to-Source Current (A)
2.0
TJ = 25 C
10
1.5
TJ = 150 C
1.0
0.5
1 3.5
15
V DS = -50V 20s PULSE WIDTH 5.5 6.0 4.0 4.5 5.0 6.5
0.0 -60 -40 -20
VGS = -10V
0 20 40 60 80 100 120 140 160
-VGS , Gate-to-Source Voltage (V)
TJ , Junction Temperature( C)
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
4
www.irf.com
Pre-Irradiation
IRHF597230
2000
1600
-VGS , Gate-to-Source Voltage (V)
VGS = 0V, f = 1MHz Ciss = Cgs + Cgd , Cds SHORTED Crss = Cgd Coss = Cds + Cgd
20
ID = -4.5A
16
C, Capacitance (pF)
Ciss
1200
VDS =-160V VDS =-100V VDS =-40V
12
800
8
C oss
400
4
C rss
0 1 10 100
0 0 10 20
FOR TEST CIRCUIT SEE FIGURE 13
30 40 50
-VDS , Drain-to-Source Voltage (V)
Q G , Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
100
100 OPERATION IN THIS AREA LIMITED BY R DS(on)
-ISD , Reverse Drain Current (A)
-I D, Drain-to-Source Current (A)
10
10
TJ = 150 C TJ = 25 C
1
100s 1ms
1 Tc = 25C Tj = 150C Single Pulse 0.1 1 10 100 1000 -VDS , Drain-toSource Voltage (V) 10ms
0.1 0.5
V GS = 0 V
1.5 2.5 3.5 4.5 5.5
-VSD ,Source-to-Drain Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
www.irf.com
5
IRHF597230
Pre-Irradiation
5.0
V DS VGS
RD
4.0
D.U.T.
+
-ID , Drain Current (A)
3.0
VGS
Pulse Width 1 s Duty Factor 0.1 %
2.0
Fig 10a. Switching Time Test Circuit
1.0
VGS 10%
td(on) tr t d(off) tf
0.0 25 50 75 100 125 150
TC , Case Temperature ( C)
90% VDS
Fig 9. Maximum Drain Current Vs. Case Temperature
Fig 10b. Switching Time Waveforms
10
Thermal Response (Z thJC )
D = 0.50 0.20 0.10 0.05 0.02 0.1 0.01
1
SINGLE PULSE (THERMAL RESPONSE)
0.01 0.00001
Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.1 1 0.01 10
P DM t1 t2
0.0001
0.001
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
-
RG
V DD
Pre-Irradiation
IRHF597230
EAS , Single Pulse Avalanche Energy (mJ)
VDS
L
350
RG
D .U .T
IA S
+
D R IV E R
VD D V DD A
300
VGS -20V
tp
250
ID -2.0A -2.8A BOTTOM -4.5A TOP
0.0 1
200
150
15V
100
Fig 12a. Unclamped Inductive Test Circuit
IAS
50
0 25 50 75 100 125 150
Starting TJ , Junction Temperature ( C)
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
tp V(BR)DSS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
QG
50K
-12V 12V
.2F .3F
-12 V
QGS VG QGD
VGS
-3mA
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
www.irf.com
+
D.U.T.
-
VDS
7
IRHF597230
Pre-Irradiation
Footnotes:
Repetitive Rating; Pulse width limited by
maximum junction temperature. VDD = - 50V, starting TJ = 25C, L=15.5 mH Peak IL = -4.5A, VGS = -12V ISD - 4.5A, di/dt - 360A/s, VDD - 200V, TJ 150C
Pulse width 300 s; Duty Cycle 2% Total Dose Irradiation with VGS Bias.
-12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. Total Dose Irradiation with VDS Bias. -160 volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions -- TO-205AF (Modified TO-39)
LEGEND 1- SOURCE 2- GATE 3- DRAIN
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 06/02
8
www.irf.com

▲Up To Search▲

Price & Availability of IRHF593230

	To Download IRHF593230 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .